COMPUR在线有毒气体监测系统 型号:STATOX 501
compur在线有毒气体监测系统 德国（中西器材） 型号:cm01-statox 501
库号：m314353
所测气体：hcn:0-20ppm
nh3:0-150ppm
基本配置：
1.501 hcn传感器探头11个,nh3探头5个
2.501 中继模块 16台
3.501 控制模块 16个
固定式气体检测报警系统，用于氧气，有毒气体及可燃气体
导轨式现代控制器，大大节省了空间，费用和安装时间。
传感器探头加上一台控制器即可组成一套完整的气体检测系统，测量数据可*保存。
安装简单，使用方便
控制器电源和普通报警模块连在导轨控制器上。
传感器更换简单可行。
combustible gases are detected with catalytic beads. sensor heads for combustible gases are certified
eex de iic t6 and can be connected directly to the 501 controller even if to be used in hazardous areas.
fixed gas detection system for oxygen, toxic and combustible gases
the din – rail mounted modern controller saves space, money and installation time.
one safe controller for all gases: any combination of a sensor head plus a controller is a complete gas detection system. this is what makes the statox 501 so safe and reliable. the statox 501 also gives you the opportunity to alter or expand existing systems with minimum expenditure.
programs for any gas and measuring range are permanently stored in the memory of the controller. the user-friendly software program allows authorized personnel to select different configurations by a simple push of a button.
easy to install and easy to use
the controller as well as the power supply and the common alarm module clip on to a din rail. the remote sensor heads and any alarm or recording devices connect to terminals on the front of the controller. the statox 501 controller has three relays for alarm 1 and 2 and system failure (115 / 230 v ac / 2 a). an analog output for recorder or process control systems is also included.
measured values are displayed on a 4 digit led-display. it is easy to program or calibrate the new 501 controller! just follow the menu!
if sensor heads are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters.
24 v power supply as well as the signals for the common alarm module are transmitted via bus from one controller to the next. all terminals are easily accessible from the front.
field proven sensors for reliable gas detection
compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. these sensors generate an electrical current proportional to the actual gas concentration. the sensor remote heads are designed as intrinsically safe certified 4 - 20 ma transmitters and have an integrated concentration display.
combustible gases can detected with a variety of catalytic beads (pellistors) or infrared technology. the sensor heads are certified and can be connected directly to the controller even if they are to be used in classified areas. the controller can supply and operate different designs of catalytic sensors. with so many possibilities, the system can easily be tailored to suit your individual application needs.
easy maintenance saves time and money
maintenance of the 4 – 20 ma transmitters is very easy. a one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas.
accessories
a range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a
19”-carrier, ensure an easy professional installation.
专业东莞到大通县货运公司,东莞到青海大通县物流专线公司
暗杆陶瓷刀闸阀DMZ73TC耐磨陶瓷刀型闸阀PZ73TC的性能特点
广州越秀区到宁波鄞州区物流专线_广州越秀区到鄞州区物流公司专线直达
江苏广东地区使用 口罩测试仪盐性油性颗粒物测试仪
天津滨海新区到金塔县物流专线直达_优质天津滨海新区到酒泉金塔县物流公司
COMPUR在线有毒气体监测系统 型号:STATOX 501
东莞到哈尔滨货运专线_东莞到哈尔滨物流公司「专线直达」
南安到措美县专线物流运输_南安到山南措美县物流专线公司
数控加工中心使用需要满足那些条件?
龙岩到张家港物流专线直达_优质龙岩到张家港物流公司
砼烟囱之字梯安装技术要求
武汉汉阳区到文县物流专线直达货运_武汉汉阳区到陇南文县物流公司
CBR-2型 室内承载比试验仪使用方法
中山到泉州专线物流运输公司_中山到泉州物流专线
佛山乐从镇到兰州安宁区货运公司,佛山乐从镇到安宁区物流专线直达货运
日本ULVAC DA-60D膜片干式真空技术资料
厦门到潜江物流专线公司_厦门到潜江专线物流公司直达货运
佛山高明区到宁波海曙区专线物流货运,佛山高明区到海曙区物流专线运输公司
龙岩到梅州物流公司,龙岩到梅州物流专线,龙岩至梅州货运专线
常见的3D打印原理有哪些 FDM和DLP哪种打印技术好
库号：m314353
所测气体：hcn:0-20ppm
nh3:0-150ppm
基本配置：
1.501 hcn传感器探头11个,nh3探头5个
2.501 中继模块 16台
3.501 控制模块 16个
固定式气体检测报警系统，用于氧气，有毒气体及可燃气体
导轨式现代控制器，大大节省了空间，费用和安装时间。
传感器探头加上一台控制器即可组成一套完整的气体检测系统，测量数据可*保存。
安装简单，使用方便
控制器电源和普通报警模块连在导轨控制器上。
传感器更换简单可行。
combustible gases are detected with catalytic beads. sensor heads for combustible gases are certified
eex de iic t6 and can be connected directly to the 501 controller even if to be used in hazardous areas.
fixed gas detection system for oxygen, toxic and combustible gases
the din – rail mounted modern controller saves space, money and installation time.
one safe controller for all gases: any combination of a sensor head plus a controller is a complete gas detection system. this is what makes the statox 501 so safe and reliable. the statox 501 also gives you the opportunity to alter or expand existing systems with minimum expenditure.
programs for any gas and measuring range are permanently stored in the memory of the controller. the user-friendly software program allows authorized personnel to select different configurations by a simple push of a button.
easy to install and easy to use
the controller as well as the power supply and the common alarm module clip on to a din rail. the remote sensor heads and any alarm or recording devices connect to terminals on the front of the controller. the statox 501 controller has three relays for alarm 1 and 2 and system failure (115 / 230 v ac / 2 a). an analog output for recorder or process control systems is also included.
measured values are displayed on a 4 digit led-display. it is easy to program or calibrate the new 501 controller! just follow the menu!
if sensor heads are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters.
24 v power supply as well as the signals for the common alarm module are transmitted via bus from one controller to the next. all terminals are easily accessible from the front.
field proven sensors for reliable gas detection
compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. these sensors generate an electrical current proportional to the actual gas concentration. the sensor remote heads are designed as intrinsically safe certified 4 - 20 ma transmitters and have an integrated concentration display.
combustible gases can detected with a variety of catalytic beads (pellistors) or infrared technology. the sensor heads are certified and can be connected directly to the controller even if they are to be used in classified areas. the controller can supply and operate different designs of catalytic sensors. with so many possibilities, the system can easily be tailored to suit your individual application needs.
easy maintenance saves time and money
maintenance of the 4 – 20 ma transmitters is very easy. a one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas.
accessories
a range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a
19”-carrier, ensure an easy professional installation.
专业东莞到大通县货运公司,东莞到青海大通县物流专线公司
暗杆陶瓷刀闸阀DMZ73TC耐磨陶瓷刀型闸阀PZ73TC的性能特点
广州越秀区到宁波鄞州区物流专线_广州越秀区到鄞州区物流公司专线直达
江苏广东地区使用 口罩测试仪盐性油性颗粒物测试仪
天津滨海新区到金塔县物流专线直达_优质天津滨海新区到酒泉金塔县物流公司
COMPUR在线有毒气体监测系统 型号:STATOX 501
东莞到哈尔滨货运专线_东莞到哈尔滨物流公司「专线直达」
南安到措美县专线物流运输_南安到山南措美县物流专线公司
数控加工中心使用需要满足那些条件?
龙岩到张家港物流专线直达_优质龙岩到张家港物流公司
砼烟囱之字梯安装技术要求
武汉汉阳区到文县物流专线直达货运_武汉汉阳区到陇南文县物流公司
CBR-2型 室内承载比试验仪使用方法
中山到泉州专线物流运输公司_中山到泉州物流专线
佛山乐从镇到兰州安宁区货运公司,佛山乐从镇到安宁区物流专线直达货运
日本ULVAC DA-60D膜片干式真空技术资料
厦门到潜江物流专线公司_厦门到潜江专线物流公司直达货运
佛山高明区到宁波海曙区专线物流货运,佛山高明区到海曙区物流专线运输公司
龙岩到梅州物流公司,龙岩到梅州物流专线,龙岩至梅州货运专线
常见的3D打印原理有哪些 FDM和DLP哪种打印技术好